HOW WE APPLY YOUR CERAMIC COATING
Ceramic coating is only as good as the prep behind it. Here's exactly how we get your paint ready and lock in the protection — right in your driveway.
Book This ProcessWash & decontaminate
A full hand wash followed by a clay bar treatment strips embedded contaminants — brake dust, rail dust, tree sap — that a wash alone leaves behind, so the coating bonds to bare paint, not debris.
Paint correction (as needed)
Light swirls, scratches, and oxidation get polished out before coating. A ceramic coating locks in whatever condition the paint is in when it goes on, so this step is where the finish is actually made flawless.
Panel wipe-down
Every panel gets wiped with an isopropyl alcohol solution to strip any remaining oils or polishing residue, leaving a completely clean surface for the coating to grip.
Coating application
The coating is applied panel by panel with a dedicated applicator, spread evenly, and leveled within its working window before it starts to flash.
Flash & buff
Once the coating flashes to a light haze, it's buffed out with a clean microfiber to remove any high spots and reveal the gloss underneath.
Cure time & care guide
The coating needs time to fully cure — typically a day or two out of the rain — before it reaches full hydrophobic strength. We'll walk you through wash timing and care so it lasts the full protection period.
HOW WE WORK
Prep before protection
We never coat over swirls or contamination — correction and decontamination happen first, so the finish underneath is worth locking in.
Your driveway, your resources
We bring our own equipment and supplies — all we need from you is access to a water spigot, a power outlet, and a spot to park.
A care guide, not just a coating
You'll leave knowing exactly how to wash and maintain your car so the coating holds its protection for the length of your package.
SEE THIS PROCESS ON YOUR CAR
Ready to lock in the shine? Let's get your car coated.